LMGZ316.25000.80
LMGZ316.25000.80
For Live Shaft, the force measuring bearings of the LMGZ-Series, designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The accuracy class of 0.3 % and the measuring range of 100:1 allows reproducible, highly precise measurements throughout the industry. The mechanical overload protection of up to 20-times the nominal force provides unsurpassed robustness. With the superior performance of the LMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. For installations where a Pillow Block mount is required the optional bracket can be utilized.
| Supplier Brand | FMS Force Measuring Systems |
|---|---|
| Product Types | Force Measuring Sensors, Load Cells, Tension Control Load Cells |
| Nominal Forces & Dimensons | Nominal forces in N: 25000, Shaft diameter mm: 80, D mm (in.): 140 (5.51), d1 mm (in.): 160 (6.30), d2 mm (in.): 90 (3.54), d3 mm (in.): 270 (10.63), d4 mm (in.): 220 (8.66), b1 mm (in.): 80.9 (3.19), b2 mm (in.): 33 (1.30), b4 mm (in.): 4 (0.16), h mm (in.): 303.5 (11.95), u mm (in.): 11 (0.43) |
| LMGZ-Series : Technical data | Sensitivity: 1.8 mV/ V, Tolerance of sensitivity: < +/- 0.2 curacy class+/- 0.3 % (F_{Nom}), Measuring range: 100:1, Temperature coefficient: +/- 0.1 % / 10 K, Temperature range: -10 to+60 C (14 F to 140 F), Protection class: IP42, Input resistance: 350 Ohms, Power supply: 1 to 10 VDC, Overload protection: 20-times nominal force, Axial load: 20 % nominal force, Sensor material: Stainless steel |
| LMGZ-Series : Options | H13: open covers for both sides-additional scope of supply 1 pcs. V-ring, H14: right-angle connector in scope of supply-replaces straight connector, H15: connector offset 90 Degrees-red point on connector side, H16: temperature range up to 120C (248F), H18: with water tight-straight connector-replaces original conector, H19: grease nipple, H21: electrical connection with PG gland with 5 m (16.4 ft.) cable-replaces connector, H29: resistant against aggressive media-especially acids (please specify)-up to 120C (248F), H30: resistant against aggressive media-especially hydrocarbons (please specify) up to 120C (248F), H31: for vacuum applications to 1E-7 hPa 1E-5 Torr- temperature range up to 120C (248F), H32: vacuum to 1E-7 hPa 1E-5 Torr-up to 150C (302F)-with pg-gland and 5 m (16.4 ft.) cable |
| GMGZ-Installation brackets | When it is not conducive to mount the sensors directly onto the machine frame – the GMGZ Series supports are available for all sizes of LMGZ sensors. |
| The Brand | FMS Force Measuring Systems AG is the market leader in the field of web tension measurement, control and specialist for web guiding solutions. |
| Supplier Brand | FMS Force Measuring Systems |
|---|---|
| Product Types | Force Measuring Sensors, Load Cells, Tension Control Load Cells |
| Nominal Forces & Dimensons | Nominal forces in N: 25000, Shaft diameter mm: 80, D mm (in.): 140 (5.51), d1 mm (in.): 160 (6.30), d2 mm (in.): 90 (3.54), d3 mm (in.): 270 (10.63), d4 mm (in.): 220 (8.66), b1 mm (in.): 80.9 (3.19), b2 mm (in.): 33 (1.30), b4 mm (in.): 4 (0.16), h mm (in.): 303.5 (11.95), u mm (in.): 11 (0.43) |
| LMGZ-Series : Technical data | Sensitivity: 1.8 mV/ V, Tolerance of sensitivity: < +/- 0.2 curacy class+/- 0.3 % (F_{Nom}), Measuring range: 100:1, Temperature coefficient: +/- 0.1 % / 10 K, Temperature range: -10 to+60 C (14 F to 140 F), Protection class: IP42, Input resistance: 350 Ohms, Power supply: 1 to 10 VDC, Overload protection: 20-times nominal force, Axial load: 20 % nominal force, Sensor material: Stainless steel |
| LMGZ-Series : Options | H13: open covers for both sides-additional scope of supply 1 pcs. V-ring, H14: right-angle connector in scope of supply-replaces straight connector, H15: connector offset 90 Degrees-red point on connector side, H16: temperature range up to 120C (248F), H18: with water tight-straight connector-replaces original conector, H19: grease nipple, H21: electrical connection with PG gland with 5 m (16.4 ft.) cable-replaces connector, H29: resistant against aggressive media-especially acids (please specify)-up to 120C (248F), H30: resistant against aggressive media-especially hydrocarbons (please specify) up to 120C (248F), H31: for vacuum applications to 1E-7 hPa 1E-5 Torr- temperature range up to 120C (248F), H32: vacuum to 1E-7 hPa 1E-5 Torr-up to 150C (302F)-with pg-gland and 5 m (16.4 ft.) cable |
| GMGZ-Installation brackets | When it is not conducive to mount the sensors directly onto the machine frame – the GMGZ Series supports are available for all sizes of LMGZ sensors. |
| The Brand | FMS Force Measuring Systems AG is the market leader in the field of web tension measurement, control and specialist for web guiding solutions. |
Let’s talk about your project
SUBMIT A QUERY
We Also Supply
For Live Shaft, the force measuring bearings of the LMGZ-Series, designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The accuracy class of 0.3 % and the measuring range of 100:1 allows reproducible, highly precise measurements throughout the industry. The mechanical overload protection of up to 20-times the nominal force provides unsurpassed robustness. With the superior performance of the LMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. For installations where a Pillow Block mount is required the optional bracket can be utilized.
