LMGZ316.10000.80

LMGZ316.10000.80

For Live Shaft, the force measuring bearings of the LMGZ-Series, designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The accuracy class of 0.3 % and the measuring range of 100:1 allows reproducible, highly precise measurements throughout the industry. The mechanical overload protection of up to 20-times the nominal force provides unsurpassed robustness. With the superior performance of the LMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. For installations where a Pillow Block mount is required the optional bracket can be utilized.

Supplier Brand

FMS Force Measuring Systems

Product Types

Force Measuring Sensors, Load Cells, Tension Control Load Cells

Nominal Forces & Dimensons

Nominal forces in N: 10000, Shaft diameter mm: 80, D mm (in.): 140 (5.51), d1 mm (in.): 160 (6.30), d2 mm (in.): 90 (3.54), d3 mm (in.): 270 (10.63), d4 mm (in.): 220 (8.66), b1 mm (in.): 80.9 (3.19), b2 mm (in.): 33 (1.30), b4 mm (in.): 4 (0.16), h mm (in.): 303.5 (11.95), u mm (in.): 11 (0.43)

LMGZ-Series : Technical data

Sensitivity: 1.8 mV/ V, Tolerance of sensitivity: < +/- 0.2 curacy class+/- 0.3 % (F_{Nom}), Measuring range: 100:1, Temperature coefficient: +/- 0.1 % / 10 K, Temperature range: -10 to+60 C (14 F to 140 F), Protection class: IP42, Input resistance: 350 Ohms, Power supply: 1 to 10 VDC, Overload protection: 20-times nominal force, Axial load: 20 % nominal force, Sensor material: Stainless steel

LMGZ-Series : Options

H13: open covers for both sides-additional scope of supply 1 pcs. V-ring, H14: right-angle connector in scope of supply-replaces straight connector, H15: connector offset 90 Degrees-red point on connector side, H16: temperature range up to 120C (248F), H18: with water tight-straight connector-replaces original conector, H19: grease nipple, H21: electrical connection with PG gland with 5 m (16.4 ft.) cable-replaces connector, H29: resistant against aggressive media-especially acids (please specify)-up to 120C (248F), H30: resistant against aggressive media-especially hydrocarbons (please specify) up to 120C (248F), H31: for vacuum applications to 1E-7 hPa 1E-5 Torr- temperature range up to 120C (248F), H32: vacuum to 1E-7 hPa 1E-5 Torr-up to 150C (302F)-with pg-gland and 5 m (16.4 ft.) cable

GMGZ-Installation brackets

When it is not conducive to mount the sensors directly onto the machine frame – the GMGZ Series supports are available for all sizes of LMGZ sensors.

The Brand

FMS Force Measuring Systems AG is the market leader in the field of web tension measurement, control and specialist for web guiding solutions.

Supplier Brand

FMS Force Measuring Systems

Product Types

Force Measuring Sensors, Load Cells, Tension Control Load Cells

Nominal Forces & Dimensons

Nominal forces in N: 10000, Shaft diameter mm: 80, D mm (in.): 140 (5.51), d1 mm (in.): 160 (6.30), d2 mm (in.): 90 (3.54), d3 mm (in.): 270 (10.63), d4 mm (in.): 220 (8.66), b1 mm (in.): 80.9 (3.19), b2 mm (in.): 33 (1.30), b4 mm (in.): 4 (0.16), h mm (in.): 303.5 (11.95), u mm (in.): 11 (0.43)

LMGZ-Series : Technical data

Sensitivity: 1.8 mV/ V, Tolerance of sensitivity: < +/- 0.2 curacy class+/- 0.3 % (F_{Nom}), Measuring range: 100:1, Temperature coefficient: +/- 0.1 % / 10 K, Temperature range: -10 to+60 C (14 F to 140 F), Protection class: IP42, Input resistance: 350 Ohms, Power supply: 1 to 10 VDC, Overload protection: 20-times nominal force, Axial load: 20 % nominal force, Sensor material: Stainless steel

LMGZ-Series : Options

H13: open covers for both sides-additional scope of supply 1 pcs. V-ring, H14: right-angle connector in scope of supply-replaces straight connector, H15: connector offset 90 Degrees-red point on connector side, H16: temperature range up to 120C (248F), H18: with water tight-straight connector-replaces original conector, H19: grease nipple, H21: electrical connection with PG gland with 5 m (16.4 ft.) cable-replaces connector, H29: resistant against aggressive media-especially acids (please specify)-up to 120C (248F), H30: resistant against aggressive media-especially hydrocarbons (please specify) up to 120C (248F), H31: for vacuum applications to 1E-7 hPa 1E-5 Torr- temperature range up to 120C (248F), H32: vacuum to 1E-7 hPa 1E-5 Torr-up to 150C (302F)-with pg-gland and 5 m (16.4 ft.) cable

GMGZ-Installation brackets

When it is not conducive to mount the sensors directly onto the machine frame – the GMGZ Series supports are available for all sizes of LMGZ sensors.

The Brand

FMS Force Measuring Systems AG is the market leader in the field of web tension measurement, control and specialist for web guiding solutions.

Product code - LMGZ316.10000.80

Let’s talk about your project

SUBMIT A QUERY


    We Also Supply

    For Live Shaft, the force measuring bearings of the LMGZ-Series, designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The accuracy class of 0.3 % and the measuring range of 100:1 allows reproducible, highly precise measurements throughout the industry. The mechanical overload protection of up to 20-times the nominal force provides unsurpassed robustness. With the superior performance of the LMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. For installations where a Pillow Block mount is required the optional bracket can be utilized.