IEPA2411241H
IEPA2411241H
IEP Series 2-Way Dispense Solenoid Valve
This extended performance, high speed dispensing valve performs consistently under high pressure and high temperature conditions. Featuring a welded stainless steel construction with ports conveniently sized for all standard 1/16? ID ferruled compression fittings, this robust 6.5 mm axial flow valve offers rapid response times and can generate droplets at 500 Hz. Its high speed operation also enables accurate flow metering, acting as a replacement for some pressure regulators. Each valve is customizable and 100% tested to ensure performance
Supplier Brand | The Lee Company |
---|---|
Product Types | 2 Way Solenoid Valve, IEP Series 2-Way Dispense Solenoid Valve, Solenoid Valve, Solenoid Valves |
Part Numbers | IEPA2411241H |
General Specifications | Operating Pressure*: 5 – 800 psig, Recommended Filtration: 22 Microns or Finer, Dispensing Frequency**: Up To 500 Hz, Internal Volume: 67 uL, Min Spike Duration***: 6 ms at 10 psig. 3.8 ms at Max Rated Pressure, Operating Temperature****: Up to 275F (135C), Weight: 4.7 grams, *Some models are rated for 0 – 300 psig only. **Dispensing frequency is based on gas flow within the rated pressure range.***A spike and hold drive is required for most applications. ****To ensure solenoid coil temperatures remain within specification duty cycle limitations may be required. |
WETTED MATERIALS | Ports Housing and Spring: 321 Stainless SteelPlungerFeCr AlloySealEPDM or FFKM. FKM Upon Request |
Specifications | SPIKE/HOLD VOLTAGE (VDC)*: 24/3.0, OPERATING PRESSURE (psig): 0-800, LOHM RATE** (Cv): 4100 Lohms (0.005), POWER CONSUMPTION AT HOLD VOLTAGE (mW): 250, SEAL MATERIAL***: EPDMOPERATING TEMPERATURE RANGE-20 to 120F (-29 to 49C), Coil Resistance (OHMs): 38, Max Internal Coil Temperature at 0.5 W****: 250F (121C), Unless otherwise indicated the listed specifications are on air at 70F (21C). *A spike and hold electrical drive is required for most applications. ** Our standard 3-way valves are available in two porting configurations. ***Reference the flow curve under the product information tab for flow rate at varying pressures. ****Maximum differential pressure across valve ports. Models rated for 30 psid up to 100 psid are also available upon request. |
Replacement Parts & Accessories | IECX0501350A: Spike and Hold Driver, Adjustable from 0.1 to 5 ms, IECX0501500A: Spike and Hold Driver, Adjustable from 1 to 100 ms, IHWX0248010A: Lead Wire Assembly, 8" (20.3 cm) With Flying Leads Ready for Termination or Soldering, IHWX0248120A: Lead Wire Assembly, 24" (61 cm) With Flying Leads Ready for Termination or Soldering. |
Typical Applications | Molecular Diagnostics, Cube Sats, Micro Thusters, Charged Particle Microscopes, Environmental Monitoring |
The Brand | A family-owned and operated company since 1948, The Lee Company USA continues to carry out our founder?s vision of providing innovative solutions to some of industry?s toughest problems. The Lee Company is a world leader in miniature precision fluid control products for industries like aerospace and defense, automotive, diagnostics, industrial and off-highway, medical equipment, scientific instruments, motorsports, oil and gas, power generation, and many others. |
Supplier Brand | The Lee Company |
---|---|
Product Types | 2 Way Solenoid Valve, IEP Series 2-Way Dispense Solenoid Valve, Solenoid Valve, Solenoid Valves |
Part Numbers | IEPA2411241H |
General Specifications | Operating Pressure*: 5 – 800 psig, Recommended Filtration: 22 Microns or Finer, Dispensing Frequency**: Up To 500 Hz, Internal Volume: 67 uL, Min Spike Duration***: 6 ms at 10 psig. 3.8 ms at Max Rated Pressure, Operating Temperature****: Up to 275F (135C), Weight: 4.7 grams, *Some models are rated for 0 – 300 psig only. **Dispensing frequency is based on gas flow within the rated pressure range.***A spike and hold drive is required for most applications. ****To ensure solenoid coil temperatures remain within specification duty cycle limitations may be required. |
WETTED MATERIALS | Ports Housing and Spring: 321 Stainless SteelPlungerFeCr AlloySealEPDM or FFKM. FKM Upon Request |
Specifications | SPIKE/HOLD VOLTAGE (VDC)*: 24/3.0, OPERATING PRESSURE (psig): 0-800, LOHM RATE** (Cv): 4100 Lohms (0.005), POWER CONSUMPTION AT HOLD VOLTAGE (mW): 250, SEAL MATERIAL***: EPDMOPERATING TEMPERATURE RANGE-20 to 120F (-29 to 49C), Coil Resistance (OHMs): 38, Max Internal Coil Temperature at 0.5 W****: 250F (121C), Unless otherwise indicated the listed specifications are on air at 70F (21C). *A spike and hold electrical drive is required for most applications. ** Our standard 3-way valves are available in two porting configurations. ***Reference the flow curve under the product information tab for flow rate at varying pressures. ****Maximum differential pressure across valve ports. Models rated for 30 psid up to 100 psid are also available upon request. |
Replacement Parts & Accessories | IECX0501350A: Spike and Hold Driver, Adjustable from 0.1 to 5 ms, IECX0501500A: Spike and Hold Driver, Adjustable from 1 to 100 ms, IHWX0248010A: Lead Wire Assembly, 8" (20.3 cm) With Flying Leads Ready for Termination or Soldering, IHWX0248120A: Lead Wire Assembly, 24" (61 cm) With Flying Leads Ready for Termination or Soldering. |
Typical Applications | Molecular Diagnostics, Cube Sats, Micro Thusters, Charged Particle Microscopes, Environmental Monitoring |
The Brand | A family-owned and operated company since 1948, The Lee Company USA continues to carry out our founder?s vision of providing innovative solutions to some of industry?s toughest problems. The Lee Company is a world leader in miniature precision fluid control products for industries like aerospace and defense, automotive, diagnostics, industrial and off-highway, medical equipment, scientific instruments, motorsports, oil and gas, power generation, and many others. |
Let’s talk about your project
SUBMIT A QUERY
We Also Supply
IEP Series 2-Way Dispense Solenoid Valve
This extended performance, high speed dispensing valve performs consistently under high pressure and high temperature conditions. Featuring a welded stainless steel construction with ports conveniently sized for all standard 1/16? ID ferruled compression fittings, this robust 6.5 mm axial flow valve offers rapid response times and can generate droplets at 500 Hz. Its high speed operation also enables accurate flow metering, acting as a replacement for some pressure regulators. Each valve is customizable and 100% tested to ensure performance