IEPA1221541H

IEPA1221541H

IEP Series 2-Way Dispense Solenoid Valve

This extended performance, high speed dispensing valve performs consistently under high pressure and high temperature conditions. Featuring a welded stainless steel construction with ports conveniently sized for all standard 1/16? ID ferruled compression fittings, this robust 6.5 mm axial flow valve offers rapid response times and can generate droplets at 500 Hz. Its high speed operation also enables accurate flow metering, acting as a replacement for some pressure regulators. Each valve is customizable and 100% tested to ensure performance

Supplier Brand

The Lee Company

Product Types

2 Way Solenoid Valve, IEP Series 2-Way Dispense Solenoid Valve, Solenoid Valve, Solenoid Valves

Part Numbers

IEPA1221541H

General Specifications

Operating Pressure*: 2 – 800 psig, Recommended Filtration: 19 Microns or Finer, Dispensing Frequency**: Up To 500 Hz, Internal Volume: 64 uL, Min Spike Duration***: 3 ms at 10 psig. 3.8 ms at Max Rated Pressure, Operating Temperature****: Up to 275F (135C), Weight: 4.7 grams, *Some models are rated for 0 – 300 psig only. **Dispensing frequency is based on gas flow within the rated pressure range.***A spike and hold drive is required for most applications. ****To ensure solenoid coil temperatures remain within specification duty cycle limitations may be required.

WETTED MATERIALS

Ports Housing and Spring: 318 Stainless SteelPlungerFeCr AlloySealEPDM or FFKM. FKM Upon Request

Specifications

SPIKE/HOLD VOLTAGE (VDC)*: 12/1.6, OPERATING PRESSURE (psig): 0-300, LOHM RATE** (Cv): 4100 Lohms (0.005), POWER CONSUMPTION AT HOLD VOLTAGE (mW): 250, SEAL MATERIAL***: FFKMOPERATING TEMPERATURE RANGE40 to 275F (4 to 135C), Coil Resistance (OHMs): 10, Max Internal Coil Temperature at 0.5 W****: 350F (177C), Unless otherwise indicated the listed specifications are on air at 70F (21C). *A spike and hold electrical drive is required for most applications. ** Our standard 3-way valves are available in two porting configurations. ***Reference the flow curve under the product information tab for flow rate at varying pressures. ****Maximum differential pressure across valve ports. Models rated for 30 psid up to 100 psid are also available upon request.

Replacement Parts & Accessories

IECX0501350A: Spike and Hold Driver, Adjustable from 0.1 to 5 ms, IECX0501500A: Spike and Hold Driver, Adjustable from 1 to 100 ms, IHWX0248010A: Lead Wire Assembly, 8" (20.3 cm) With Flying Leads Ready for Termination or Soldering, IHWX0248120A: Lead Wire Assembly, 24" (61 cm) With Flying Leads Ready for Termination or Soldering.

Typical Applications

Molecular Diagnostics, Cube Sats, Micro Thusters, Charged Particle Microscopes, Environmental Monitoring

The Brand

A family-owned and operated company since 1948, The Lee Company USA continues to carry out our founder?s vision of providing innovative solutions to some of industry?s toughest problems. The Lee Company is a world leader in miniature precision fluid control products for industries like aerospace and defense, automotive, diagnostics, industrial and off-highway, medical equipment, scientific instruments, motorsports, oil and gas, power generation, and many others.

Supplier Brand

The Lee Company

Product Types

2 Way Solenoid Valve, IEP Series 2-Way Dispense Solenoid Valve, Solenoid Valve, Solenoid Valves

Part Numbers

IEPA1221541H

General Specifications

Operating Pressure*: 2 – 800 psig, Recommended Filtration: 19 Microns or Finer, Dispensing Frequency**: Up To 500 Hz, Internal Volume: 64 uL, Min Spike Duration***: 3 ms at 10 psig. 3.8 ms at Max Rated Pressure, Operating Temperature****: Up to 275F (135C), Weight: 4.7 grams, *Some models are rated for 0 – 300 psig only. **Dispensing frequency is based on gas flow within the rated pressure range.***A spike and hold drive is required for most applications. ****To ensure solenoid coil temperatures remain within specification duty cycle limitations may be required.

WETTED MATERIALS

Ports Housing and Spring: 318 Stainless SteelPlungerFeCr AlloySealEPDM or FFKM. FKM Upon Request

Specifications

SPIKE/HOLD VOLTAGE (VDC)*: 12/1.6, OPERATING PRESSURE (psig): 0-300, LOHM RATE** (Cv): 4100 Lohms (0.005), POWER CONSUMPTION AT HOLD VOLTAGE (mW): 250, SEAL MATERIAL***: FFKMOPERATING TEMPERATURE RANGE40 to 275F (4 to 135C), Coil Resistance (OHMs): 10, Max Internal Coil Temperature at 0.5 W****: 350F (177C), Unless otherwise indicated the listed specifications are on air at 70F (21C). *A spike and hold electrical drive is required for most applications. ** Our standard 3-way valves are available in two porting configurations. ***Reference the flow curve under the product information tab for flow rate at varying pressures. ****Maximum differential pressure across valve ports. Models rated for 30 psid up to 100 psid are also available upon request.

Replacement Parts & Accessories

IECX0501350A: Spike and Hold Driver, Adjustable from 0.1 to 5 ms, IECX0501500A: Spike and Hold Driver, Adjustable from 1 to 100 ms, IHWX0248010A: Lead Wire Assembly, 8" (20.3 cm) With Flying Leads Ready for Termination or Soldering, IHWX0248120A: Lead Wire Assembly, 24" (61 cm) With Flying Leads Ready for Termination or Soldering.

Typical Applications

Molecular Diagnostics, Cube Sats, Micro Thusters, Charged Particle Microscopes, Environmental Monitoring

The Brand

A family-owned and operated company since 1948, The Lee Company USA continues to carry out our founder?s vision of providing innovative solutions to some of industry?s toughest problems. The Lee Company is a world leader in miniature precision fluid control products for industries like aerospace and defense, automotive, diagnostics, industrial and off-highway, medical equipment, scientific instruments, motorsports, oil and gas, power generation, and many others.

Product code - IEPA1221541H

Let’s talk about your project

SUBMIT A QUERY


    We Also Supply

    IEP Series 2-Way Dispense Solenoid Valve

    This extended performance, high speed dispensing valve performs consistently under high pressure and high temperature conditions. Featuring a welded stainless steel construction with ports conveniently sized for all standard 1/16? ID ferruled compression fittings, this robust 6.5 mm axial flow valve offers rapid response times and can generate droplets at 500 Hz. Its high speed operation also enables accurate flow metering, acting as a replacement for some pressure regulators. Each valve is customizable and 100% tested to ensure performance